How do I fix error code E iS on my LG LF30S8210S?

1. undefined: Check connector between Main PCB and ice maker sensor for looseness or disconnection. 2. undefined: Reconnect or repair if loose. 3. undefined: Measure sensor resistance. Compare to the freezer/icing sensor table: -4°F/-20°C=22.33k, 23°F/-5°C=10.10k, 32°F/0°C=7.88k. 4. undefined: If 0 ohm (short) or open, replace the sensor. 5. undefined: If resistance is out of range for ambient temperature, replace sensor. 6. undefined: If resistance is normal, enter test mode and check ice maker motor operation.

LG LF30S8210SRefrigerator

Error Code E iS

Defect of ice maker sensor

Moderate

Address soon - your appliance may not work properly

How to Fix

1
Check connector between Main PCB and ice maker sensor for looseness or disconnection.
2
Reconnect or repair if loose.
3
Measure sensor resistance. Compare to the freezer/icing sensor table: -4°F/-20°C=22.33k, 23°F/-5°C=10.10k, 32°F/0°C=7.88k.
4
If 0 ohm (short) or open, replace the sensor.
5
If resistance is out of range for ambient temperature, replace sensor.
6
If resistance is normal, enter test mode and check ice maker motor operation.